Hot Rolled / WRD
Wire Rod (Coil)
Hot rolled wire rod per EN 10017 standard, 4-36mm diameter range, delivered in coils.
Technical Specifications
Size Range
4 - 36 mm
Standard
EN 10017
Tolerance
EN 10017 Tolerances
Length
Coil Form
Key Features
- Delivered in coil form
- Suitable for cold drawing and rolling
- Wide diameter range (4-36mm)
- High surface quality
- Suitable for wire drawing and fastener production
- Low oxide scale
Applications
- Wire drawing (steel wire production)
- Bolt and nut manufacturing
- Spring wire production
- Nail and rivet manufacturing
- Cold forming
- Welding wire production
Dimension Table
| Form | Size Range | Standard | Steel Grades |
|---|---|---|---|
| Wire Rod | 4 - 8 mm | EN 10017 | SAE1018, C30, C35, 20MnB5 |
| Wire Rod | 8 - 13 mm | EN 10017 | C45, SAE1018, 30MnVS6, 33MnCrB5 |
| Wire Rod | 13 - 20 mm | EN 10017 | 42CrMo4, C45, 30Mn5, 20MnB5 |
| Wire Rod | 20 - 28 mm | EN 10017 | 42CrMo4, C45, 51CrV4, SAE4140 |
| Wire Rod | 28 - 36 mm | EN 10017 | 42CrMo4, C45, 34CrMo4, 34CrNiMo6 |
Technical Notes
- 01Coil weight typically ranges from 1.5 to 2.5 tons.
- 02Surface condition: as-rolled or annealed available.
- 03Phosphating or lime coating recommended before cold drawing.
- 04Cold heading quality (CHQ) available for fastener production.
- 05Internal diameter standard: 800-1200mm.
Related Blog Posts
Technical articles, guides and industry analyses
Technical
Steel Hardness Testing Methods: HRC, HB, HV Guide
Comprehensive guide to steel hardness testing methods. Comparison of Rockwell (HRC), Brinell (HB), and Vickers (HV) methods, conversion tables, and proper method selection.
3 min
Manufacturing
Steel Heat Treatment Processes: Annealing, Quenching & Tempering, Normalizing Guide
A comprehensive guide to steel heat treatment processes. Parameters, suitable steel grades, and proper process selection for annealing, normalizing, quenching & tempering, and case hardening.
3 min