Fittings / RED
Reducer
Fitting used to change pipe diameter between two sections.
Technical Specifications
pressure
Sch 10S – Sch 160 (BW) | 2000# – 3000# (SW/THD)
temperature
-196°C ~ +800°C
size
1/2" - 48"
materials
A234 WPB, A105, A182 F304/L, A182 F316/L
standards
ANSI B16.9, EN 10253, DIN 2616
Key Features
- Smooth transition
- Low flow loss
- Compact design
- Easy installation
- Concentric and eccentric types
- High strength
Applications
- Pump connections
- Pipe size transitions
- Equipment connections
- Boiler feed lines
- Compressor systems
- Tank lines
Dimension Table
| size | largeOd | smallOd | thickness | length |
|---|---|---|---|---|
| 1" x 1/2" | 33.4 | 21.3 | 3.38 | 51 |
| 2" x 1" | 60.3 | 33.4 | 3.91 | 76 |
| 4" x 2" | 114.3 | 60.3 | 6.02 | 102 |
| 6" x 4" | 168.3 | 114.3 | 7.11 | 152 |
| 8" x 6" | 219.1 | 168.3 | 8.18 | 203 |
| 10" x 8" | 273.1 | 219.1 | 9.27 | 254 |
Technical Notes
- 01Concentric reducers can be used in vertical or horizontal runs.
- 02Eccentric reducers prevent air locking in suction lines.
- 03Reduction ratio should not exceed 2:1.